ITC Bridge Home 
Home Search search Menu menu Not logged in - Login | Register

ITC Bridge and iDigitalMedium.com are now VARANORMAL.COM Please visit: https://www.varanormal.com This site does not allow new registrations, and is now an online archive of a decade of Paranormal and ITC (Instrumental Transcommunication) experimentation from 2007 - 2016 We thank you for a wonderful decade! ~ Keith Clark & Ron Ruiz

 Moderated by: Vicki Talbott, Keith Clark, ArizonaEvp
New Topic Reply Printer Friendly
Memorex 2 Xtreme Hack MB221  Rating:  Rating
AuthorPost
 Posted: Oct 4th, 2015 07:20 PM
  PM Quote Reply
1st Post
Dr. Heinz Doofenshmirtz
Moderator


Joined: Nov 17th, 2013
Location: Liberty, Missouri USA
Posts: 300
Status: 
Offline
With the supply of Radio Shack hack-able radios drying up, and the price going through the roof. The quest for the poor man's ghost box is not dead.

Allow me to introduce you to the Memorex MB221 2Xtreme. A portable sport style digital PLL synthesized AM/FM arm band radio.

The average price of these radios are going for about $12, shipping included. (check E-bay)

The surgical procedure is very simple and should take less than 10 minutes to perform.

The materials needed:
1 mini phillips head screwdriver.
1 razor blade.
1 set of small side cutters or something similar.

FYI, I didn't discover this hack, just spreading the good word of the ghost box gospel.


Attached Image (viewed 1204 times):

memorex1.jpg

Back To Top PM Quote Reply  

 Posted: Oct 4th, 2015 07:21 PM
  PM Quote Reply
2nd Post
Dr. Heinz Doofenshmirtz
Moderator


Joined: Nov 17th, 2013
Location: Liberty, Missouri USA
Posts: 300
Status: 
Offline
Step 1: Remove these five screws.

Attached Image (viewed 1080 times):

memorex2.jpg

Back To Top PM Quote Reply

 Posted: Oct 4th, 2015 07:26 PM
  PM Quote Reply
3rd Post
Dr. Heinz Doofenshmirtz
Moderator


Joined: Nov 17th, 2013
Location: Liberty, Missouri USA
Posts: 300
Status: 
Offline
Step 2: Carefully separate the enclosure.
Step 3: Locate the row of solder points for the grey ribbon cable, and find the solder joint labeled "mute".

Attached Image (viewed 1080 times):

memorex3.jpg

Back To Top PM Quote Reply  

 Posted: Oct 4th, 2015 07:30 PM
  PM Quote Reply
4th Post
Dr. Heinz Doofenshmirtz
Moderator


Joined: Nov 17th, 2013
Location: Liberty, Missouri USA
Posts: 300
Status: 
Offline
Step 4: Remove these two screws.
Step 5: Lift the circuit board from the right side, and open it up "like a book."

Attached Image (viewed 1002 times):

memorex4.jpg

Back To Top PM Quote Reply

 Posted: Oct 4th, 2015 07:42 PM
  PM Quote Reply
5th Post
Dr. Heinz Doofenshmirtz
Moderator


Joined: Nov 17th, 2013
Location: Liberty, Missouri USA
Posts: 300
Status: 
Offline
Step 6: Follow the wire you identified earlier as the "mute wire", from the top board to the bottom board.
Step 7: Use your razor blade to carefully cut the insulation in between the adjacent wires on the ribbon.
Step 8: Use your side cutters to snip the "mute wire" as close to the bottom circuit board as possible, and bend it backwards.
Step 9: reassemble in reverse, make sure when you are placing the top side of the enclosure back on, you line up the lock/unlock lever with the switch on the circuit board.
Step 10: Put your batteries in, power on, and press the down/up button (hold down for a second). You should be scanning mute free.  Enjoy!

Attached Image (viewed 1090 times):

memorex5.jpg

Back To Top PM Quote Reply  

 Posted: Mar 28th, 2017 01:34 PM
  PM Quote Reply
6th Post
EPIC
Member


Joined: Feb 26th, 2017
Location:  
Posts: 19
Status: 
Offline
Wow that's amazing!!! Nice find! I've seen a handful of people on YouTube using these already with great results.



____________________
Check out the most (((EPIC))) Paranormal evidence here : https://www.youtube.com/channel/UC8MlfBql09o21jgI_e5qnuQ
Back To Top PM Quote Reply

Current time is 09:28 PM  
ITC Bridge > Instrumental Transcommunication (ITC) > Frequency Sweep | Radio Sweep Tuning > Memorex 2 Xtreme Hack MB221 Top




UltraBB 1.17 Copyright © 2007-2008 Data 1 Systems
Page processed in 0.1638 seconds (35% database + 65% PHP). 26 queries executed.