 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | Mar 3rd, 2008 |
| Location: | Muskogee, Oklahoma USA |
| Posts: | 349 |
| Status: |
Offline
|
The wire gauge of 12V automotive relays is approx 40AWG yep.
You might well get some results by simply wiring 2 relays together !
On the bottom of such relays, there are normally 2 pins on one end and 4 on the other. The 2 pins are the coil, the 4 are the contacts that open and close.
So the method would be to wire the 2 pins oppositely of each other.
The cases do come away quite readily, although normally in many pieces. It's a thin brittle plastic. Pliers can be used to crack the plastic (at the 4 pin contacts end) then the plastic will crack apart.