View single post by Dr. Heinz Doofenshmirtz | |||||||||||||
Posted: Oct 4th, 2015 07:42 PM |
|
||||||||||||
Dr. Heinz Doofenshmirtz
|
Step 6: Follow the wire you identified earlier as the "mute wire", from the top board to the bottom board. Step 7: Use your razor blade to carefully cut the insulation in between the adjacent wires on the ribbon. Step 8: Use your side cutters to snip the "mute wire" as close to the bottom circuit board as possible, and bend it backwards. Step 9: reassemble in reverse, make sure when you are placing the top side of the enclosure back on, you line up the lock/unlock lever with the switch on the circuit board. Step 10: Put your batteries in, power on, and press the down/up button (hold down for a second). You should be scanning mute free. Enjoy! Attached Image (viewed 1099 times):
|
||||||||||||
|