View single post by mikesndbs
 Posted: Nov 7th, 2011 12:42 AM
Full Topic
mikesndbs



Joined: Nov 21st, 2009
Location: United Kingdom
Posts: 182
Status: 
Offline
Hi, sorry for my absence of late.

I have been working quite extensively with the diode circuits.
There should be no coil and no capacitors in the conventional way!
Please see this thread:
http://www.itcbridge.com/forum/view_topic.php?id=1402&forum_id=5&page=1

Resistors may be needed, the circuit needs to be screed and one option is the tin as shown.
The antenna needs to be short as shown.

If I touch the antenna then yes some radio stations can be heard.
Do your tests during mid day when HF and MW propagation is flat.

However, you must try not to think about this device in radio terms!
I am not at all convinced that any EVP is radio based, what the detector does, is to provide a carrier for the EVP.

Hope this helps

Mike