ITC Bridge > Instrumental Transcommunication (ITC) > The Creative Corner - Miscellaneous Electronic ITC Experimenting > Electromagnetic Communication Device |
ITC Bridge and iDigitalMedium.com are now VARANORMAL.COM Please visit: https://www.varanormal.com This site does not allow new registrations, and is now an online archive of a decade of Paranormal and ITC (Instrumental Transcommunication) experimentation from 2007 - 2016 We thank you for a wonderful decade! ~ Keith Clark & Ron Ruiz |
Moderated by: Keith Clark, joecioppi, EVPfan, EVPDave, Bruce, ArizonaEvp |
Author | Post | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
n30g30 Member
|
Hi A few months ago a friend asked me to build a spirit box; this was the first time i had heard of the technology so, intrigued, i set about investigating. I couldn't understand the echo chamber in the franks box design, i was sure it was entirely unnecessary and even potentially detrimental, since people seem to get results with 'shackhacks' which don't have the echo chamber. I then looked at the design of the spiricom and realised instantly that the spiricom and the franks box, drawn as a block diagram, are exactly the same device. On a functional level they have different interpretations of one component - lets call it the 'modulation box'. Both devices use a raw audio signal (franks box uses sweep radio noise, spiricom uses tone generators) passed into the 'modulation box' and then recorded/ played back. the 'modulation box' takes the raw audio signal and transmits it into the atmosphere, where it can be modulated by a spirit or other entity, then the 'modulation box' receives the modulated signal and passes it to a recorder/ playback device. In a franks box the echo chamber is the modulation box, transmitting the raw audio source as audio; the spiricom transmits the raw audio source as am radio. So, both men built exactly the same device in very different ways. William O'Neill claimed to have assistance from the spirit world in designing his spiricom. Frank Sumption was working on his sweep radio design when he says he received a suggestion from the spiritworld to include the echo chamber in his design. Realising that if both men had been instructed to build the same device yet used very different implemetations, i feel it is reasonable to assume a certain amount of misinterpretation. If this is the case then it is possible neither device is precisely what the spirit world evidently want us to build. Current theory and evidence suggest that spirits can manipulate electromagnetic energy better than any other. So why not communicate through EM? Electromagnetic Communication Device I realise this has been rather long winded but here is my conclusion: using the same block diagram as O'Neill and Sumption, lets make a device that will transmit a raw audio signal as an electromagnetic field, then receive it (hopefully modulated) and play it back. I have made a very simple electromagnetic coil attached to a 3.5mm headphone jack. I connect this to my audio source (mobile phone playing spiricom tones mp3) my receiver coil (exactly the same as transmitter coil) was a little fuzzy because the magnetic wire was too thick, so i bought a telephone pickup coil very cheap from maplin (uk) and use that as receiver. I have connected these with a cardboard tube to hold them about 4 inches apart and sound quality is crystal clear. I have had no chance to field test this device yet, so cannot report any success. I am describing it here in the hope that someone else will make and test one, as i'm not sure when i will be able to test it. If you're still reading then thank you and i hope this has been of some interest |
|||||||||
joecioppi Moderator
|
Dear member, I have been studying the spirit communications phenomenon from random tosses of rune stones, chinese coins, reading of shuffled tarot cards, and recently the reception of random radio vocals on scanning radio receivers. I have decided that the information is carried by the seemingly random variations of the different methods, not by scalar fields or electromagnetic fields. Presumptions about the spirit voices being modulated on the Spiricom tone signal are not correct. It is atmospheric noise on an open frequency of an AM receiver at around 29 Mhz, in the original system, that contains the voices and the Spiricom tones that tend to enhance the voices above the noise received at that frequency. |
|||||||||
joecioppi Moderator
|
Dear n30, Experimenters looking for earth sounds have built receivers that respond to base band or audible frequencies that are generated from the earth and can be detected on magnetic fields. They have sensitivity similar to radio frequency receivers but are designed to amplify audio frequencies and filter out power line interference at 60 Hz. The typical sounds heard are buzzes, clicks, whistles, but angelic choirs, and voices are also heard.The block diagram for these would be similar to a magnetic coil connected to a device like an audio recorder with sufficient gain to record and play back the earth sounds. Joe |
|||||||||
Bruce Moderator
|
Joe joecioppi wrote: I have decided that the information is carried by the seemingly random variations of the different methods, not by scalar fields or electromagnetic fields. I completely agree Joe. I appears that the random variation itself in any "signal" is somehow being used (modulated?) to transduce the information from nonphysical reality to our physical reality. The prototype I am working on lately is intended pickup ONLY random noise from a suitable field, electrostatic, electric, magnetic, etc. The device is being designed to add the smallest amount of noise (zero would be ideal) to that random signal as possible in the course of amplifying it to audible levels. Also, I found a book that should be required reading for experimenters in this field. "Paranormal Technology" by David M. Rountree is the book. This guy is a little too overboard on technical side and lacking much if any metaphysical background, but his book is a gold mine of information Bruce |
|||||||||
joecioppi Moderator
|
Hi Bruce, Random behavior of frequencies is present in almost any noise source. Electrical noise is convenient for electronics designers to generate and use as a contact with the random behavior inherent in the universe. If one is to use a wide band source like a diode junction source used to produce white noise that source can be built in a convenient package that can be shielded from power source interference which contains regular periodic waves that are not strictly random. One can filter out narrow bands of frequencies of interest...like vocal frequencies that contain voices. Other bands can contain intelligence that can be used to generate computer data for voice synthesis or video data for spirit pictures. It still requires the users intelligence to detect the intelligence in the random sources.Random data or frequencies without intelligence is not recognized. What do you think of all of that? Joe |
You have chosen to ignore Landmine. click Here to view this post |
---|
Joined: | Jun 9th, 2017 |
Location: | |
Posts: | 8 |
Status: |
Offline
|
Last edited on Jun 16th, 2017 08:57 PM by Tobias Claren
Joined: | Dec 31st, 2006 |
Location: | Clearwater, Florida USA |
Posts: | 1637 |
Status: |
Offline
|
Joined: | Jun 9th, 2017 |
Location: | |
Posts: | 8 |
Status: |
Offline
|
Last edited on Jun 20th, 2017 09:57 PM by Tobias Claren
Joined: | Dec 31st, 2006 |
Location: | Clearwater, Florida USA |
Posts: | 1637 |
Status: |
Offline
|
Joined: | Jun 9th, 2017 |
Location: | |
Posts: | 8 |
Status: |
Offline
|
Last edited on Jun 20th, 2017 10:48 PM by Tobias Claren
Joined: | Jun 5th, 2012 |
Location: | Inverness, Scotland |
Posts: | 85 |
Status: |
Offline
|
Joined: | Mar 15th, 2008 |
Location: | |
Posts: | 55 |
Status: |
Offline
|
Joined: | Jun 9th, 2017 |
Location: | |
Posts: | 8 |
Status: |
Offline
|
Attached Image (viewed 394 times):
Last edited on Jun 26th, 2017 08:55 AM by Tobias Claren