View single post by clockdryve | |||||||||||||
Posted: Feb 14th, 2011 05:30 PM |
|
||||||||||||
clockdryve
|
No, havent tried it (never built it anyway). My Raudive Receiver I purchased from eBay has that circuit though. The Receiver I use has BOTH circuits, so I should say that I HAVE used it. What I have is included on each side (seperated), one circuit on left...and one circuit on right channel. And I use it on Mono equipment, so with the mono/stereo adapter this will combine the signal onto one channel. If I used a stereo recorder then I could actually seperate the signals and find which is working BETTER at the time... Although I haven't done that yet. It's been to cold here in Iowa to search for EVP's the way I prefer---but it has been getting warmer
|
||||||||||||
|