mikesndbs
Joined: | Nov 21st, 2009 |
Location: | United Kingdom |
Posts: | 182 |
Status: |
Offline
|
|
clockdryve wrote: If you want to try a different circuit...try this "less know" design from the attachment. It uses a different resistor and removes the coil and adds a capacitor...Be SURE you insulate the location where the "stiff" wire (straightened paper clip is fine) comes out of the metal enclosure so it doesn't TOUCH if you decide to use the metal. You can build this without the metal enclosure...but if you want it as original then it is to be included in BOTH designs.
Have you tried this one?
|