View single post by Slider2732 | |||||||||||||
Posted: Nov 28th, 2008 02:33 PM |
|
||||||||||||
Slider2732
|
Presumably the humidity gauges display a slowly changing reading and not rapid movements Joe ? I'd think that rapid movement would mean a faulty set up to the designers and they'd recalibrate. There could be loads of paranormally interesting devices that have been developed as something else and then found to have a perceived fault..hmmm Another thought is that of averaging, on commercially available units. Sample and hold methods might be used and such a unit may be able to have such averaging removed. Anrede is to be trialed again and modified now, including the op-amp method and hopefully including a decent readout. Normally I use LED's, but am actually quite keen to employ different methods of visual readout. Audio output is to be at least able to be preliminarily shaped onboard the unit. Space is at a bit of a premium, as you can see above, so all may develop into Anrede 2. First things first though.. Thanks all for your support so far Last edited on Nov 28th, 2008 02:35 PM by Slider2732 |
||||||||||||
|