 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | Nov 27th, 2007 |
| Location: | |
| Posts: | 144 |
| Status: |
Offline
|
AM radio generating static at 29.9 (Works well at the upper end of the AM dial too)
Output of radio is fed into a six occillator tone generator. I "tune" to the static (Yes it does have pitch)
SO far I tune: Unison....5th...Octave...sometimes a fourth also. I basically am tuning for harmonic resonance.
Then this blend is fed into a Berhinger mixer. Noise reduction is used at the mixer.
The resultant blend is then recorded. I ask questions via a mic that is also into the mixer.
The recorded result is then run thru a Band filter. During this process, words can start to be heard.
Then I use a Yamaha vocorder to "color" the static to give it pitch. (Ala Spiricom)
Now, I'm only acting as a receiver unit with this set up. I'm working under the assumption that "They" are broadcasting on available frequencies.
My theory is that this would be the most logical way to contact us from their side via available frequency that can be picked up on this side.
IThe next step will be to use wireless transmitting/receiving in the system.
Stay tuned for more....
Best,
John D