View single post by Dr. Heinz Doofenshmirtz | |||||||||||||
Posted: Nov 2nd, 2014 05:55 PM |
|
||||||||||||
Dr. Heinz Doofenshmirtz
|
This is awesome..... Made me think of a different way to produce a stair step..... basically a hex inverter for a clock, triggering a decade counter. Out of each output of the decade counter you would put a voltage divider....preferably on a potentiometer.....that way you can adjust each one independently, and get a different voltage per output...... Unfortunately with all the outputs tied together..... seems the voltage flows backwards through all of the voltage dividers...it causes an extremely low output voltage.... I'm thinking diodes.... If you tie all the cathodes of the voltage dividers together and put a cap between them and ground, also between the output voltage and ground, you can give your wave some sexy curves.... This pretty much destroys any resemblance of a stair case wave......but if gives you a cool way to modify your sweep waves..... Attached Image (viewed 293 times):
|
||||||||||||
|